Medical devices

Company Profarma -Produkt s.r.o., ended the development of its last product from the  line of AJATIN disinfections in the beginning of 2013.   The products was named AJATION EXTRA STRONG. It is the strongest disinfection product of AJATIN products. It has been registered and classified as II.b medical device (disinfection for high level disinfection of medicel devices or other objects that are sensitive to high temperatures such as flexible endoscopes, fibriloscopes, probes or other surgical instruments) because of its high effectivity, low toxicity and good material compatibility

AJATIN EXTRA STRONG

Medical device  AJATIN® EXTRA STRONG (class – IIb.) phtalaldehyde disinfectant that is determined for high level disinfection of  medicel devices or other objects that are sensitive to high temperatures such as flexible endoscopes, fibriloscopes, probes or other surgical instruments.

a9b5a576a7c9bfe1ad49dff67666e08c

Indication

AJATIN® EXTRA STRONG is used for a high level disinfection of medicel devices or other objects that are sensitive to high temperatures such as flexible endoscopes, fibriloscopes, probes or other surgical instruments. The device does not require an activator as the older aldehydes. It is stable. The expiry date is two years from the date of manufacture. It can be used as a one-time product or repeatedly. After opening the solution must be used within 60 days if kept in original packaging. If it is transfered to differnt vessel use within maximum 10 days and if tested on its minimum effective concentration by AJATIN EXTRA STRONG test stripes.  Repeated use without testing can cause inproper liquidation of all pathogens and can cause contamination of the user.  Do roztoku vkládáme předměty dekontaminované a očištěné, prosté krve a bílkovin a dobře okapané, aby nedocházelo k ředění ZP AES.  Nádoba s roztokem musí být vždy dobře uzavřena.

Use

The objects that are intended for high level disinfection have to be properly cleaned from the dirt residues. The appropriate procedures should be described in particular SOP´s or other directives. The multi-component  devices have to be dismantled before disinfection according to manufacturers instructions.

AJATIN® EXTRA STRONG is intended for a disinfection of  semi-critical medical devices, where a heat sterilization is inapplicable and where the high level disinfection is the only possibility.  Medical device  AJATIN® EXTRA STRONG can be single used and also repeated used.

Single use

Note the date of opening on bottle or in evidence log book. It is allowed to use the solution for a period of 60 days from the date of opening. (unless the period does not exceed the expiry date of the solution).

Repeated use

Pour the solution AJATIN® EXTRA STRONG into a different container and mark on it the date of action and name of the disinfection solution. Such solution can be used only for a period of 10 day from the date of pouring from the original packaging. It is necessary to use the indication stipes for detection of minimum effective concentration of active substance (o-phtalalaldehyde) before use.  The minimum effective concentration is set on 0,35% when all posible pathogens are liquidated in precribed time. The indication can be performed by the  AJATIN® EXTRA STRONG testing stripes. Follow more detailed instructions in instructions for use of  AJATIN® EXTRA STRONG.